Cangzhou Juqing Auto Parts Co Ltd
cell-phone number：0317-3760498
fax：0317-3760498
email：723471042@qq.com
address：Xingbieying Development Zone, Hejian City
We are in the process of driving, sometimes hard to avoid can appear some problems, especially the car clutch, when these problems we should be how to deal with it, don't know if you have know, today I just simple to share with you, hope to be able to life after a help to you!
When the clutch is new situation, we first remove the bottom cover of the clutch, the transmission hangs in neutral, the clutch on the end. Then, use screwdriver moving platen. If can easily BoZhuan, clutch, clutch parts no problem; If dial does not move, clutch is not complete.
Then begin to troubleshoot and solve: 1, check whether the clutch pedal free stroke is too large, and adjust. 2, check whether separation lever highly consistent, is too low. Upon separation fork under the car, make release bearing front gently against the separation lever in the end, turn the clutch to view a week, if the separation of leverage in contact can end at the same time and release bearing, separation of leverage height inconsistencies, should be adjusted. If separate lever highly consistent, separation is still not complete, check the lever height. Each separate lever will be dispatched to the same height, if you can complete separation, original improper adjustment or wear nothing. Separation of lever, have to readjust the clutch pedal free stroke. 3, if, after the adjustment of normal separation still not complete, will remove the clutch, check whether the driven plate is installed backwards, axial movement is difficult without warping, master-slave plate, whether lever screw loose, floating pin out. 4, for the new riveting friction piece of clutch, to check the clutch plate and friction plate is too thick. If too thick, can add gasket between the clutch cover and the flywheel. 5, for clutch hydraulic transmission, in addition to the above check, still should check whether the brake fluid is lack, whether the pipeline leakage side by side out of the air in the hydraulic system.
Did you achievedmore after read; A lot of professional knowledge can be applied to practice, some seemingly to problem can be solved step by step slowly, clutch fault although trouble, but generally not escape analysis several reasons. , of course, that he couldn't make it can only go to repair shop repair or the nearest 4 s shop
